• Installers must familiarise themselves with Focus Install Manual requirements before installation.
• You should have received 2 crates.
• Please ensure nothing has been damaged in transit.

Please Note: Cut Out Sizes will be provided on your order confirmation as each item is custom made it order.

1. Ensure opening in panel is square and level.
2. There must be no more than 3mm deviation between parallel faces of cutout.
3. The bottom edge of the cut out is set approximately 300mm from floor but this is dependant on client and site requirements.
4.  After cutting coolroom panel, the edges of cut panel must be capped and fixed with C channel (Not supplied). Capping channel must be installed level between inner and outer faces.

Enjoy your new glass doors. If you have any further questions please reach out to our team.